HAAS, VF-3, MACHINING CENTER, VERTICAL, CNC Mill
Stock Number: 10777
Haas VF-3 40 x 20
Click to view larger photo
|Table Size||18" x 48"|
|Spindle Nose to Tabletop||4" - 29"|
|Max Table Load||3000 lbs|
|Taper||Cat 40 Taper|
|Max RPM||7500 RPM|
|Motor HP||15 HP|
|Mach Dime||129" X 101" X 119"|
Haas CNC Control
RS232 Port for DNC Operation
Rigid tapping / macros
scaling / 1Mb memory
Floppy Drive / Programmable coolant nozzle
-4th axis ready / Set up for a brushless 4th axis.
We have done some work on it. Bearings in the tool changer were replaced 3 years ago. Spindle taper was ground by SGS and drawbar was rebuilt about 18 months ago. One of the servo drives was replaced around 18 month ago. Spindle drive rebuilt by Precision Zone just over a year ago. Oil Pressure Sensor, orientation ring, and encoder belt replaced recently. We added an M code controlled air blast system. The beacon light is broken, but I will fix it if you want it.
Machine is all set for a 4th axis, though I have never used one. 4th axis drive is brushless. It's also setup for a Renishaw probe, but I have never used that either. The cards and infrared eye are all there to make it work.
I have the old servo drive if you want to get it rebuilt. I also have a roll of weather stripping for the door glass.
I run high speed tool paths with it regularly. I don't do 3D machining, but I think it could handle a pretty good feed rate.
Machine weighs around 13,000 lbs. I can help with moving it. Under power, running parts.
Manta Machinery and Equipment Sales, Inc
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers